EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Cost Controller is a hugely efficient photo voltaic controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and process steadiness for a wide range of photovoltaic (PV) programs.
Crucial Characteristics with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic Power harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
LCD Screen with actual-time info monitoring.
Several Load Handle Modes which includes guide and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Be certain all factors are provided: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the model range and voltage rankings match your photo voltaic panel and battery requirements.
2. Mounting the Cost Controller
Find a perfectly-ventilated, dry location near the battery financial institution.
Safe the Tracer AN controller utilizing the presented mounting brackets.
Retain right clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Often adhere to appropriate security protocols and ensure the technique is powered off prior to connecting parts.
Phase 1: Hook up the battery terminals for the charge controller (good to positive, detrimental to adverse).
Stage 2: Join the photo voltaic panel array on the PV input terminals.
Step 3: Hook up the load terminals if utilizing a immediate load connection.
Action 4: Double-Check Click Here out all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability around the controller by connecting the battery initial.
Utilize the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Handbook, timer, gentle Management.
five. Monitoring and Information Logging
The Tracer AN Collection supports authentic-time checking using the MT50 remote meter.
Data is usually logged through the RS485 interaction port working with program for example Solar Station Laptop.
Remote checking is feasible While using the EPEVER WiFi module.
6. Troubleshooting Typical Challenges
Situation one: No Electricity Output
Look at battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: Over-Voltage Safety
Verify the solar array’s voltage ranking.
Adjust process parameters if necessary.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations from the menu.
Advantages of the Tracer AN Collection with MSR Technological know-how
The multiphase synchronous rectification know-how guarantees:
Bigger Effectiveness: Lowered Electrical power losses throughout conversion.
Improved Dependability: Secure overall performance beneath variable hundreds.
For a longer period Battery Lifestyle: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and procedure longevity.